Monteverde Ritma Ballpoint Pen Review

Monteverde Ritma Ballpoint Pen Review

(Jeff Abbott is a regular contributor at The Pen Addict. You can find more from Jeff online at Draft Evolution and Twitter.)

Continuing in my personal quest to collect as many green things as I can this year, I've been using the Ritma from Monteverde as my pen for taking notes at my desk during the workday. The Ritma is a minimal design that looks great and is easy to use.

It doesn't matter how many amazing fountain pens I have in my collection — I always have room in my daily kit for a humble ballpoint pen. They don't write as well or produce anywhere near the level of beautiful and nuanced lines as my fountain pens, but they're so simple. They utilitarian in a way that fountain pens often struggle. They require little maintenance and can take a lot of punishment. What they gain in utilitarianism, they certainly lose in style and customization.

Monteverde Ritma Ballpoint Pen

For a ballpoint to be comfortable for me to use, I'm looking for a few things: a good refill, a comfortable grip, and a balanced weight. At first glance, I didn't think the Ritma would be comfortable to use, but I let the pretty green color convince me to give it a try anyway — and I'm glad I did! It's actually a really comfortable pen to use.

The nose of the pen is shiny and looks like it would be a fingerprint magnet, but it doesn't actually attract a lot of fingerprints. And, when I see a shiny surface finish like this, I automatically assume that it will be slippery to handle and won't work well for writing more than a few words before I get annoyed with the unstable grip. This isn't the case with the Ritma. Whatever finish Monteverde used for the grip are is fantastic. It provides plenty of grip and friction even after writing for a while. This is good news because the nose/grip section is long enough that most people will only grip it by this area instead of the more textured barrel area.

Monteverde Ritma Ballpoint Pen Clip

The other factor that makes this pen comfortable to use is the balanced weight. It's not a super lightweight pen — it has some heft, but not so much to cause fatigue after a short period. When holding the pen, it feels like the center of gravity is close to the grip area, with just enough weight at the top of the pen to provide a nice balance when writing so that you have excellent control of the tip. I was surprised by how well it balanced in my hand once I held in my normal writing grip. According to the specifications, the pen is a combination of steel and aluminum. I'm guessing the grip is steel, and the outside of the body is aluminum. The steel materials add an appropriate amount of weight in all the right spots.

Monteverde Ritma Ballpoint Pen Twist

To achieve a minimal look, the Ritma uses a twist mechanism to control the refill extension. A half rotation of the grip section is all it takes to extend or retract the refill. You can do this one-handed, but it requires you to do some minor hand gymnastics to shuffle the pen orientation back and forth to operate the twist mechanism and then return to writing position. I normally use both hands to open/close the pen, but I wish it was a bit easier to operate with one hand. This is where the click mechanism wins in use, but they don't look as sleek as this one!

Monteverde Ritma Ballpoint Pen Refill

Writing with the Ritma is a great experience. The balance is great for my standard three-finger grip, and I don't feel fatigue after writing a couple of pages non-stop. The refill that ships with the Ritma is a black Monteverde P1, but the pen will accept any Parker-style refill. There are many, many fantastic options in this format, which is another win for the Ritma. You can easily swap in another ballpoint refill (I prefer the Schmidt EasyFlow 9000) or even a gel refill. While the Monteverde refill is good and reliable, I prefer the Schmidt refill because it's smoother and darker. Again, it's great that the pen accepts such a ubiquitous refill so that you can swap in your favorite refill if you want.

Monteverde Ritma Ballpoint Pen Comparison

The Monteverde Ritma is $36, and this feels like a good price for what you get. It feels like a high-quality product when you handle it and write with it, and it looks great too. It's subtle enough to be at home in a professional setting, but it's also sturdy enough to be used in a portable setup with no problems. If you like the design, then this is a great ballpoint pen to pick up for yourself or as a gift. And, if you don't like the green there are several other colors to choose from too!

(Vanness Pens provided this product at a discount to The Pen Addict for review purposes.)


Enjoy reading The Pen Addict? Then consider becoming a member to receive additional weekly content, giveaways, and discounts in The Pen Addict shop. Plus, you support me and the site directly, for which I am very grateful.

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!

Monteverde Ritma Ballpoint Pen Writing
Posted on May 14, 2025 and filed under Monteverde, Ballpoint, Pen Reviews.

Meet Your Maker: Dave Dollar, Dave Dollar Custom Pens

Meet Your Maker: Dave Dollar, Dave Dollar Custom Pens

(Caroline Foty's first fountain pen was a 1970s Sheaffer No Nonsense that still writes perfectly. Since she discovered pens by independent makers, she wants "one of each, please" and wants to meet all the makers. Maybe you do, too. She lives in Baltimore with pens, cats, and all kinds of fiber arts supplies.)

Dave Dollar didn’t think he needed a lathe, but he couldn’t resist a good deal.

“I made jewelry boxes, and furniture – why would I need a lathe?”

Then, a friend was clearing out his uncle’s house, and there was a garage full of tools. “There were over a hundred pen kits, two hundred blanks, a mini lathe, and all the tooling. It was probably a $4000 value and he sold it to me for $500.” He tried making a pen, and was instantly hooked. The motor on the mini lathe burned out fairly quickly and he replaced it with a better one. “The hook was set when I realized I could finish a piece of functional art in a day.”

After making component pens for two years, Dollar found out that Jim Hinze was teaching a workshop in how to make a three part custom pen at the Southern California Penturners Gathering, and it was on his birthday. So he went. The following week, COVID lockdowns began. By the end of the year he was specializing in three part pens.

He also discovered the As The Pen Turns podcast, and he listened to it during the year when there were no pen shows, thinking about what he could do at shows and thinking about his focus. Because of his name, he began searching for coins to use as cap finials, and found great sources of the novelty coins that he still uses.

When 2022 rolled around and there were pen shows again, he splurged on a weekend attendee pass at the Baltimore pen show, and spent time with some of the people he most admires today – Jonathon Brooks, Ryan Krusac, and of course Jim Hinze. “I didn’t know then about vintage pens – I saw them and liked the small sizes of them. At that point I was just making the Liberty, my largest pen, and some of the mid-size Ikes.” Seeing these pens inspired him to make his Mercury model, a slimmer pen.

Dave Dollar

In October of that year, Dollar attended the Dallas show as a first time vendor, debuting his Mercury model there. “I sold ten pens! That was great!” The Mercury is now his best-selling model. It is convertible, so it can be both a fountain pen and a rollerball that uses the “Schmidt Cartridge-Rollerball System” with a fountain pen ink converter. While some rollerball tips built to work that way have been something of a flop, this one seems to have pleased everyone who has tried it.

Dave Dollar Fude

His most recent innovation was suggested by his wife Judith, who is an Urban Sketcher. She is fond of the Sailor Fude De Mannen nib and asked for a pen made out of nicer material that she could use with that nib. His Freedom model is a turned cap and body that takes the Fude De Mannen section from a Sailor pen – you can bring your own section, or get one from him. Judith Dollar has begun bringing her postcards and stickers to shows, and offering workshops tailored to urban sketchers and journalists; her most popular one, which is already open for registration at this year’s DC show, is “Make a Pocket Sketch Journal.”

Dave Dollar Benjis

Dollar is endlessly inspired by the possibilities of available pen materials, but that doesn’t mean he wants to make his own. “I’m not tempted. I get materials from thirty-two different sources. I have a proprietary material from Joe Fonseca of Just Joe Pens for my ‘All about the Benjis’ pens. I love micarta and ebonite. When I sell a pen, I put in a card with the name of the material and the maker.” He is looking at doing more pens that mix and pair materials, and has had a request from a customer for color bands. One direction he doesn’t plan to go: “I’m not a wood pen guy. There are already several fantastic wood pen artists!”

Dave Dollar Mercury

Like most makers, Dollar doesn’t have many pens he’s made. “The ones I keep are the ones with imperfections, that I can’t sell.” His favorite pen is a Montblanc Starwalker with a fine nib that he bought in France, but he also loves his Leonardo Momento Magico that he bought at Casa Stilografica in Florence, and his Hello Tello Venice with a Nemosine nib.

“The nib is very important to me, and I’m trying to be more cognizant of it.” He’s fine-tuned his model lineup to offer nib variety: Bock #8 nibs tuned by Kirk Speer and engraved with the Dave Dollar logo, for his larger Liberty model; #5 nibs in his Mercury, which allows him to offer Jowo, Schmidt, and Bock titanium nibs; #6 nibs in his Ike model, which lets him use the Nemosine nibs he has a stock of; and the Fude De Mannen in the Freedom model. He is working on some additions to the Mercury’s capabilities – a customer has requested a pen that will take a vintage Esterbrook nib.

Dave Dollar Fountain Pens

Full-time pen making has allowed Dollar to keep up with some volunteer work that is important to him. For eight or nine years he has coached a youth pistol and rifle shooting team, which has had repeat national championships; he’s taking eighteen kids to the Nationals competition in Columbus, Ohio in July. He’s getting ready to pass that commitment to someone else, since his son has aged out of participating. He’s also been asked to make an elaborate receptionist desk for his church. “There are curves, and inlays… it’s taking months.”

Leaning into the money angle suggested by his last name was a way to begin with something uniquely his own. “You have to have a differentiation of your products, and you have to be a little bit of a salesman too - people love the stories of the coins and the materials. You need to strike out on your own and be original. Seeing what other makers do is fine, but you need to not only think outside the box, but think of how many other boxes there are to think outside of.”

Dave Dollar Nib

Having been “invited to retire” from his corporate job in 2023, Dollar decided to give full time pen making a go. He is constantly aware of how different this job is from the one he had. “Going from industrial software and corporate strategy, where I was so far away from the end user… Now there is someone right at my table who is going to use this pen. I’m making functional art and people are buying it and loving it. What better validation is there?”

Dave Dollar’s work can be seen on his Instagram, his website Dave Dollar Custom Pens, and at shows in Baltimore, Washington DC, Atlanta, Dallas, Arkansas, and the Little Craft Fest in Houston. (He hopes to be able to add San Francisco in 2026.)


Enjoy reading The Pen Addict? Then consider becoming a member to receive additional weekly content, giveaways, and discounts in The Pen Addict shop. Plus, you support me and the site directly, for which I am very grateful.

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!

Posted on May 12, 2025 and filed under Meet Your Maker.