Posts filed under Mechanical Pencil

Zebra DelGuard Type-Lx 0.3 mm Mechanical Pencil Review

Zebra has been making inroads in the mechanical pencil market over the past couple of years, and the DelGuard model has been the primary vessel.

The DelGuard features an internal mechanism to prevent lead breakage for both vertical and sideways pressure. It works amazingly well in every model we have reviewed on the blog. Never once have I had a lead breakage or writing consistency issue.

Since Zebra has seemingly nailed this technology, they have ramped up the styles and models available in the DelGuard. There are different price points, different materials, and yes, even Hello Kitty. Getting that Sanrio deal is when you know you have made it in the stationery market.

The model I’m reviewing today is the Type-Lx, which is currently the highest priced model at $13.50. It’s the only DelGuard model to feature a metal grip section, which is where much of the price increase lies. It also features a rotating grip section which none of the other models have…and I wish this one didn’t have it either.

I was ready to compare this pencil - at least in barrel style and price point - to the Uni-ball Kuru Toga High Grade and the Uni-ball Shift Pipe Lock. Both are metal section/plastic barrel mechanical pencils in the same price range, each with a different feature set than the DelGuard. But this rotating section threw me for a loop.

Why it is there I can’t fully say. It’s not listed in the product description, and I didn’t even notice it until I slid my fingers down to where the nose cone connects with the section. Have you even been using a pen and feel like the nose cone has started to come unthreaded from the barrel? That’s what I assumed I was feeling. No big deal, I’ll just tighten it back up. What, what? The whole thing rotates 360 degrees?

I don’t like it, and it is unnecessary. I can’t figure out why it was designed this way technically either. If it was an auto-tip rotation pencil like the Kuru Toga I’d understand, but this is a lead protection pencil. Maybe pressure gets displaced slightly as you write, lessening the chance of breakage? If that is the case, the the Type-Lx has better design than all of the other DelGuards, which doesn’t make logical sense.

Traditionally, one rotates the pencil in hand while writing as the lead wears down. Having the section rotate eliminates that on occasion, like if the clip of the pencil is resting in the cusp of your hand in the direction you are rotating. You will attempt to spin the pencil but the clip works against the section rotation, and it gets you nowhere.

Yes, I obsess over these somewhat minor things because there are better choices for you to make. I can’t think of a situation offhand where I would recommend this pencil over any of the lower priced DelGuards.

DelGuard technology is fantastic and the build quality of these pencils is excellent. Just don’t feel like you are getting an upgraded experience buying the upgraded barrel. In fact, it could be a downgrade for you like it was for me.

(JetPens provided this product at no charge to The Pen Addict for review purposes.)

Enjoy reading The Pen Addict? Then consider becoming a member to receive additional weekly content, giveaways, and discounts in The Pen Addict shop. Plus, you support me and the site directly, for which I am very grateful.

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!

Posted on October 30, 2017 by Brad Dowdy and filed under Zebra, DelGuard, Mechanical Pencil.

Modern Fuel Mechanical Pencil 2.0 Review

Andrew Sanderson, the owner and designer behind Modern Fuel, sent me a prototype of his 1.0 mechanical pencil last year to get feedback on. I liked it, but didn’t love it, and explained to him why. It was too light, and the balance was a bit off. The refinement for a 1.0 release wasn’t there, at least in my book.

With Version 2.0, Andrew has made all the updates I personally was looking for in a quality machined mechanical pencil, and, after getting to test out this prototype, I am happy to back his current Kickstarter project.

The change list from Version 1.0 to Version 2.0 is large, and includes new materials, a retractable tip, and most impressively, a custom built internal mechanism. That last item alone had to be quite an engineering feat.

By designing his own mechanism, Andrew allows you to easily swap out the internals of the pencil and change the lead size. 0.5 mm, 0.7 mm , and 0.9 mm mechanisms are available, and you can even order all three for a single pencil. The retractable tip was a pleasant surprise as well. I didn’t expect that at all, but it is a big bonus for mechanical pencil fans.

My prototype model is made from stainless steel, and is accordingly heavy. Not too heavy, mind you, but I prefer using the 0.9 mm mechanism due to the weight. In general, the heavier or larger the pen or pencil, the wider the tip I prefer. The 0.9 mm delivers a line similar to using a wooden pencil, and allows for a greater range of motion when writing. I’m still surprised at how much I like the width.

One add-on that I haven’t seen offered before is an option for an eraser plug. The standard configuration ships with an eraser, but you can buy an accessory that allows you to remove the eraser and seal the opening. I’m generally a no pencil eraser person, but I think I prefer having the eraser available on this style of pencil. I don’t think the plug adds anything style or functionality wise and likely isn’t worth the additional $12 unless you are really committed to the look.

Like most of our buying decisions, this one comes down to value. Will you get enough usage out of this product to justify the price? The Modern Fuel Mechanical Pencil starts at $70 for Stainless Steel, Brass, or Copper, and $130 for Titanium. That’s very expensive, but worth it in my book. The amount of engineering alone justifies the price for me, plus I like supporting people who make cool things. After using this prototype for the past few weeks I decided to back the Stainless Steel model, and am excited to get this in the rotation once the project completes.

My thanks to Modern Fuel for loaning me this prototype for purposes of this review.

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!

Posted on October 9, 2017 by Brad Dowdy and filed under Modern Fuel, Mechanical Pencil, Pencil Reviews.

Zebra DelGuard Type-ER Mechanical Pencil Review

(Jeff Abbott is a regular contributor at The Pen Addict. You can find more from Jeff online at Draft Evolution and Twitter.)

Mechanical pencils come in all shapes and sizes, and it seems that most manufacturers try to introduce a unique angle or feature for their pencils to make them stand out from the pack. Some times, the features are pure gimmicks, but other times we benefit from the ingenuity of their design. In the case of the Zebra DelGuard Type-ER, it's the latter.

The DelGuard Type-ER looks like an ordinary mechanical pencil, but it has a couple of tricks up its sleeve. The first one involves the eraser. Many mechanical pencils hide the eraser under the click mechanism cap, which means you have to remove it in order to erase. Unfortunately, this makes the metal cap easy to lose. Other pencils use some sort of twist or push mechanism to show or hide the eraser when you need it. This is good, but the Zebra takes it a step further by relying on gravity and friction.

See, when you're writing with the pencil, the eraser is hidden inside the cap. But, when you turn the pencil upside down to erase, the eraser pops out. Once you apply some pressure to the eraser, the friction between the eraser casing and the pen body cause it to stay put while you erase. Brilliant. The only time this won't work well is if you're trying to erase in a position where the normal assumptions of gravity aren't true (say, upside down or up against a wall).

The other tricks this pencil boasts involve the lead system. We all know that if you press too hard on mechanical pencil pencil lead, it will break. Well, the DelGuard Type-ER has a couple of springs in the body that prevent that from happening. Are you pushing down on the lead too hard? Then the lead pipe will slide down to protect the lead until the pressure eases. Same thing is true if it detects too much sideways pressures on the lead. This is handy if you're tracing a ruler with the pencil at an angle and don't realize you're pressing down too hard. Very nifty indeed.

In my tests, this system works great. I'm more prone to put too much pressure on the lead from the side, so this feature is a lead saver for me. It also serves as a training tool to let me know (without wasting lead) that I'm pressing too hard while writing or drawing.

This pencil doesn't have a fancy click mechanism, a lead rotation device, or any of the other usual niceties, but the two features it does sport are down-right cool.

Apart from that, the grip on this pencil is extremely comfortable. Even without the lead protection system and cool eraser, this is a great pencil.

The Zebra Del-Guard Type-ER only works with 0.5mm lead, but it comes in a variety of colors (with an extra couple of erasers included) at JetPens. It will set you back about $12, but that's a sweet price for a pen with a couple of surprising tricks. I've been pleasantly surprised by it, and I'll be keeping it in my "top five" list of mechanical pencils for a while.

(JetPens provided this product at no charge to The Pen Addict for review purposes.)

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!