Posts filed under ystudio

ystudio Resin Fountain Pen Review

As a ystudio fanboy, I was a little concerned about the Resin Fountain Pen when I first saw pictures of it. How would it stack up to my favorite Brassing models? Would the plastic barrel take a way some of the magic of the brand? My fears have proven to be unfounded, as this is a pen I want to use all of the time.

I will admit that it took me a couple of days to warm up to it. While it shares some of its design DNA with the Brassing Fountain Pen, it really is a different beast altogether. It sat on my desk. I stared at it. It stared back at me. I picked it up. I uncapped it, posted it, and capped it back again. And then I decided ok, time to ink it up. That’s where I ran into trouble.

As much as I am going to rave about this pen in a moment, there is a flaw in its design that must be mentioned: For a cartridge/converter pen, it doesn’t fit standard international converters. Or I should say, it doesn’t fit most of them.

I should have known something was up when it didn’t ship with one, but that’s neither the first - nor last - time a c/c pen won’t ship with one. I thought well fine, the ystudio Resin Fountain Pen uses Schmidt hardware for the nib unit, so I’ll just grab one of the dozens of Schmidt converters I have laying around. I attached it to the feed post, dipped it in the ink bottle, and drew up the ink just fine. Then I tried to screw the barrel back on.

When standard international converters fail to fit into barrels it is usually a length problem. Not here, as the barrel is more than long enough. With this pen, it is a diameter problem. The metal ring around the barrel is too wide to fit inside the barrel.

My first thought was oh, there is something wrong with my converter - let me try another. And another. Until I realized it wasn’t the converter that was the problem. How could this be, seeing that other ystudio pens use the same Schmidt hardware and Schmidt converters fit those pens just fine? I’m guessing that the microscopic measurement that the barrel needed to be expanded by would have altered the entire design? I don’t see how, but I find it hard to believe that this was an oversight. Manufacturing tolerance maybe?

The workaround I found is either to use cartridges - short or long international sized - or a narrower converter, like the one in the picture. Mine is from Kaweco, which looks like this one from Monteverde. Is there a name for this style of converter that we can pass on to ystudio so they can package them with future pens to avoid this unnecessary angst?

*Clairefontaine Triomphe* *with* *Standard Bindery Stargaze*

Ok, I’ve prattled on long enough about an issue that in the end is a minor annoyance on a pen that gets everything else right. Here is what you really need to know: I cannot put this pen down. I’m not sure if it is the shape, the feel, the weight, the nib, or the tactile-ness of it, but I love using it. I have to set it out of reach sometimes just so other pens get a fair shake.

To try and describe it I’d say it feels close to a large marker in the hand, but it allows for the fine control of a technical pen. These aren’t words I normally use to describe a fountain pen, but they work for this one. It’s different, in a good way.

The way the resin hexagonal barrel smoothly transitions into the the brass grip section is a joy. Brass discs also adorn the top of the cap and end of the pen as an added touch of flair. The cap posts, although not with the same snap as when capping the pen. It could come loose if you set the pen down, for example, or fidget with it.

I’ve said it before - earlier in this review even - that the best compliment that I can give any product is that I want to use it, and that I miss it when I’m not. The ystudio Resin Fountain Pen is a perfect example of that. And at $72, I feel very comfortable recommending it, converter weirdness and all.

(Kenro Industries provided this product at no charge to The Pen Addict for review purposes.)

Enjoy reading The Pen Addict? Then consider becoming a member to receive additional weekly content, giveaways, and discounts in The Pen Addict shop. Plus, you support me and the site directly, for which I am very grateful.

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!

Posted on April 20, 2020 by Brad Dowdy and filed under ystudio, Fountain Pens, Pen Reviews.

ystudio Portable Brassing Ballpoint Pen

ystudio has become one of my favorite brands to follow over the past few years. Their product designs are classic and functional, while adding modern touches with their choices of materials and finishes. And, they want you to use, love, and destroy your pen or pencil in the process.

Their latest release is the Portable Brassing Ballpoint, which features - wait for it - a gel ink refill. An exceptional Ohto 0.7 mm Parker-style refill at that. This one caught my eye because they added new barrel colors to the regular lineup, in this case red and white to go along with the standard black. They have offered red and white in special editions previously, and now they are part of the regular lineup.

And they are different, at least in the case of the red model I have for review. In the past, ystudio’s barrel finishes have been either raw metals, like brass and copper, or a satin-like black paint coating. All of these materials lended themselves to patina and wear - core features of the brand. The new ballpoints, however, have a glossy paint finish that I’m not quite sure what to make of yet.

It’s different, that’s for sure. And unexpected, based on my past experiences with ystudio. I like it, and it is beautiful, but will I be able to get the full brassing effects like with their other models? Do I even want to since it looks so nice right now?

Like the other brassing pens and pencils, this one ships with sandpaper to help you customize the look. This caught me off guard the first time I saw it years ago, and I still find it funny that a strip of sandpaper is included with each pen. You can see the effects of its use on my ystudio Brassing Ballpoint review. It is forced patina, if you will. And I don’t plan on forcing this one.

The name of this pen has “portable” in it, similar to the portable fountain pen, but I find it to be far less portable in reality. It is a twist barrel, which is easily manipulated with one hand, but the accessories that ship with it make it less usable, even though they may help with the dictionary definition of portability.

The top of the pen contains a built in brass loop, made to be used with the included leather rope necklace or brass shackle. The necklace accessory isn’t the right choice for a twist pen. Necklace pens are usually capped so you can remove the pen and write while keeping the cap safely secured around your neck. You would need to remove the necklace over your head every time you want to write with this pen, unless you are constantly writing at eye level.

I thought the shackle might be a cool accessory to add on to the back end of the pen, but when put in place is it so loud bouncing off the barrel when writing that it becomes a distraction. I guess you can attach it to a clip on a bag or purse (Portability!) when not in use, but that is the only benefit besides aesthetics that I can think of.

To me, the idea of a portable pen is one that I can carry in my pocket and can use easily when needed. The ystudio Portable Brassing Ballpoint tries to be portable with its added accessories, but in each case, it makes the pen more difficult to use. If anything, this is a desk pen or pen case carry pen. And a good one at that.

In a nutshell:

Is this a good pen? Yes.

Would it make a good gift? Yes.

Would you enjoy it? Yes.

Do I enjoy it? Yes.

Would I recommend it? Maybe.

Would I choose it over any other ystudio pen? No.

That’s what it boils down to. It is a good pen. Some will even find it to be great. I find it to be ystudio’s least interesting and least useful design. In fact, I think it goes against many of their design principles. The funny thing is, if they called it the Glossy Barrel Gel Pen and dropped the accessories it would make more sense based on what this product actually is.

(Kohezi provided this product at no charge to The Pen Addict for review purposes.)

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!

Posted on November 26, 2018 by Brad Dowdy and filed under ystudio, Pen Reviews.

ystudio Mechanical Pencil Review

I’m a ystudio fanboy. You know this by now. The Brassing Fountain Pen was an instant classic the moment it was released, and they continued to expand the lineup beyond the ballpoint with great items like the Desk Pen.

The ystudio Mechanical Pencil is the most recent addition to the lineup, and, as much as it pains me to say this, it’s not their best effort.

Let’s talk about the good before I delve into what gives me pause about recommending this pencil. First off, it is stunning to look at. The hexagonal brass barrel is refined, and the copper knock sets off the design perfectly. The build is extremely refined, which is a consistent theme across the entire ystudio lineup.

The way this pencil looks is a dream scenario for Patrick Ng. It’s impossible to take a bad picture of it, and it fits into any photo setup perfectly.

As great as that sounds, we buy things to use them - at least that’s what I believe in. This is not the easiest pencil to use, especially for longer writing sessions.

The barrel is wide, which, for smaller motion writing instruments like mechanical pencils, is not a good thing. Added width means added stress if the tip isn’t correspondingly wide. This is why you see very few wide barrel mechanical pencils on the market. And when you do, like with the Pilot Dr. Grip for example, they are designed specifically to help writers with hand and grip issues, like arthritis. The wide barrel of the ystudio has no such benefits. This design would make for an excellent 2.0 mm clutch pencil.

Secondly, you cannot have a continuation of the hex barrel into the grip section of a mechanical pencil. Unless you are using the Uni-ball Kuru Toga, it is common to rotate the pencil in your hand to use the sharper edge of the graphite. When using this pencil, I often rotate my grip right on to a hex edge, which is an uncomfortable writing position. I then have to adjust a second time before continuing to write. I don’t like having to think about that every ten to twelve letters.

“But Brad, wooden pencils are often hex barrels and you don’t have a problem with them?” Correct! The difference is in the diameter. The narrower barrel of wooden pencils helps with that issue, and the hex edges are softer/more rounded. The design benefits wooden pencils, while being detrimental in the case of the wider ystudio mechanical pencil.

A quick glance around the mechanical pencil market tells you everything you need to know about good pencil design. Do any other successful pencils have a hex grip? Nope. There are lots of hex barrels - like the famous Rotring 600 - but they morph into round grips for a reason.

Two minor things worth mentioning as well: There is no clip, and no internal eraser. Neither of those things bother me, although the lack of eraser is an odd choice considering the simple knock design. It’s almost like it is asking for it, yet it’s not there.

The ystudio mechanical pencil puts on a good show. It is fantastic looking, and is a photography standout. But writing instruments are made to be used, and using this one is more challenging than most.

(Vanness Pens provided this product at no charge to The Pen Addict for review purposes.)

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!