Posts filed under Ohto

Ohto Fine Fountain Pen Review

Ohto Fine Fountain Pen


There is no doubt that the Ohto Fine is a beautiful fountain pen. Long, sleek lines, sharp chrome accents, and a few curves for added visual effect. But functionality is the most important thing for me when using and reviewing a pen, and that is where the Ohto Fine falls short.


I have had great success with other Ohto pens I have reviewed, so I was surprised to be let down by this one. First of all, the length and weight of the pen with the cap posted makes it top heavy when writing. This leads to balance issues, and eventually writing fatigue if you use this pen for long periods of time. I didn’t make it that far due to my second issue with the pen - nib alignment.


I am not a fountain pen expert by any stretch, so it took me some time to figure out. The pen was very scratchy when making certain strokes, and upon closer inspection, the nib appears to be mis-aligned. It is very slight and hard to see, but one side of the nib is higher than the other. I could probably adjust it for slightly better performance, but by this point I was disillusioned with it.


The final issue - and one that will vary between user - is the grip section. Ohto may have gotten too aggressive with the design on this one, because the sharp curve of the barrel hits me right where I grip the pen. That angle cut digs right in to my fingers, and again limits the length of time I can write with it.


At $22.00, it isn’t going to break the bank, but there are better options in the same price range - the Lamy Safari comes to mind immediately. Sorry Ohto, three strikes and you’re out!

Posted on October 10, 2011 and filed under Fountain Pens, Ohto, Pen Reviews.

Ohto F-Spirit Fountain Pen Review

Ohto F-Spirit


This is a guest post by Bryan Gushikawa.


Ohto is a company best known for its ceramic rollerball and gel pens, but they’ve also gotten into the midrange fountain pen market with pens such as the Rook and F-Spirit. These pens are based around a lightweight aluminum body with a lacquer coat and Iridium Point Germany (IPG) nibs. Although many cheap pens use IPG nibs and the quality can vary widely, the Ohto pens use the better nibs and so these are smooth writers. The pens are fitted for international standard cartridges, so you can try out many different inks. The nib width seems fixed at fine and the pen writes really well, since the lightweight body is very well balanced.


Smoothness: Even though it’s an IPG and very stiff, the nib is excellent and lays down a nice, solid line.


Grip and Balance: The grip is smooth plastic, and isn’t as long as some others, but it’s adequate. The balance is excellent with the cap posted and the entire pen feels light and easy to write with. The barrel is just right as far as thickness goes.


Ink Flow: Although feeds might need adjusting from the factory, I had no problems with this pen. No skips or blotches.


Build Quality: VERY pleasing! The cap snaps crisply and the lacquered finish is excellent, with no misfills or gaps. The threads on the feed and barrel are perfectly aligned and the pen has no problems related to manufacturing. Tines on the nib were perfect from the factory.


Capacity: Takes any standard international cart. Converters are available and I am sure that long international cartridges fit, too.


Clip: Strong metal with a ball at the bottom to hold fabric. VERY good design!


Post: Perfect post! Uses a friction fit, with the plastic shell inside the cap keeping scuff marks off of the barrel. The cap also snaps shut tightly on the front of the pen. No drying out happened.


Overall: This pen is an excellent value for the money in these days of plastic barrels. The class and style are perfect for the office and the usage of international carts means that you can go to JetPens and try many different types of inks! I recommend Kaweco inks as superior in this pen.


Ohto F-Spirit

Posted on September 23, 2011 and filed under Fountain Pens, Ohto, Pen Reviews.

Ohto Super Promecha 1500P 0.7mm Review

Ohtp Super Promecha 0.7mm


The Ohto Super Promecha 1500P is one of the craziest pencils I have ever reviewed. It is so customizable I bet I played around with the different settings on it for ten minutes before even starting to write with it.


Let’s get the basics out of the way first. This is a fully aluminum barrel with a knurled grip, on board eraser, and lead grade indicator – all of which most drafting pencils in this class have. There are a couple items that separate it from the rest of the pack though.


First of all, not only is the guide pipe fully retractable, its writing length is fully customizable. Twisting the knurled grip brings the pipe from 0mm all the way out to 4mm, and anywhere in between. You can write normally with it in any position.


Secondly, there is a dial built into the barrel that controls the amount or lead extended with each push. You can get anywhere from 0.2mm to 2mm of lead with each click. I spent more time on this than any normal person should! I have never owned a pencil like this before and was pretty fascinated.


If you are a heavy drafting pencil user the Ohto Super Promecha line needs to be on your radar. Casual users may not get the full benefit of all this pencil has to offer, but if you want your pencil your way then this is the one.


Be sure to check out all of the pictures and video on the JetPens product page.

Posted on September 2, 2011 and filed under Drafting Pencil, Ohto, Pencil Reviews, Super Promecha.