Luddite Liberator 4 Pocket Case Review

(Jeff Abbott is a regular contributor at The Pen Addict. You can find more from Jeff online at Draft Evolution and Twitter.)

Pen cases (and bags in general) are one of the products that I have a lot of trouble keeping under control when it comes to my collection. I want them all because I can envision a unique purpose for each unique bag or case. The main problem is that there are so many different worthy designs and products out there — it's almost impossible to choose. That makes it so much more important to choose wisely to ensure my collection isn't needlessly large.

It's not very often that I come across any products that have any critical flaws or weaknesses, so that makes it even more astounding when it happens. At least in this case, it makes the decision of whether to add it to the case collection all that much easier.

What I'm leading up to is a specific pen case that I've tried using for the past couple of weeks. The Luddite Liberator Cordura 4 Pocket Pen Case looks interesting on the surface, uses some good quality materials, and hits a couple of trendy checkboxes that should interest many different customers. But be warned, dear reader, that this pen case has a critical flaw: it doesn't actually close when zipped up. The zipper works smoothly and flawlessly, but it's undercut by the two large gaps in between the zipper panel and the side panels of the case — one on each end of the case!

When I was first unpacking and inspecting the case, this design stood out to be almost immediately, but I shrugged it off thinking that it must do an adequate job of keeping objects inside the case — otherwise, how did it make it to the market? After loading it up with a few pens and trinkets, I did a quick test. I used both hands to smoothly rotate the case end over end to simulate being tossed in a bag. Three of the four pens fell out and onto the floor. One more rotation shot out the last pen as well.

At this point, I'm inspecting the case closer and trying to find a manufacturing problem — missing or broken stitches that might provide an answer for why it was so obviously ineffective at its one job. Nope — the fit and finish are fantastic and only show that this case is operating as designed.

And for that one simple reason, all I can do is dissuade any potential buyers from purchasing this case. I could talk about the main compartment and how it's divided by a nifty internal pocket sleeve, but that doesn't matter. The mesh zippered pocket on the front of the case is the only thing that works great. But there's no point in using the mesh pocket if you leave the main compartment empty. I could also talk about the Cordura fabric and overall build quality, but that doesn't matter either. Just for fun, I put as many pens as I could into the gap between the case walls and the zipper strip. I could easily fit three to four pens into the gap with plenty of wiggle room. What?!

In looking at Luddite's other Liberator case options, it seems that they definitely understand how to make a case that completely seals. This just further confuses me for why this 4 pocket case even exists, and that's the real problem I have with it: this is a product that shouldn't exist. There are so many good cases on the market that can fit almost every use case, and they all fulfill the most basic requirement: keep my stuff inside the case when I zip it closed.

The other case options look interesting, but this particular case design just leaves a bad taste in my mouth when it comes to this brand. There are so many excellent options out there that will serve you well. In my mind, Luddite has to offer a truly exceptional product to get me over this initial setback.

(JetPens provided this product at no charge to The Pen Addict for review purposes.)

Enjoy reading The Pen Addict? Then consider becoming a member to receive additional weekly content, giveaways, and discounts in The Pen Addict shop. Plus, you support me and the site directly, for which I am very grateful.

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!

Posted on June 1, 2022 by Jeff Abbott and filed under Luddite, Pen Case.

Tesori Venezia Fountain Pen Giveaway

Yesterday, I reviewed the Tesori Venezia Fountain Pen, and today, we give one away! I bought the pen in yesterday’s review for myself, and Jon Tello, the maker behind the Tesori brand, kindly donated a second one to give away to my amazing readers.

The giveaway pen is the beautiful Teal Blue Pebble model, with an added bonus. Not only does it have a great piece of Venetian glass on the top finial, I happened to pick out a sneaky model with a second piece inlaid in the end finial as well. Jon tells me this is done randomly throughout the product lineup as a bit of secret fun.

To enter this giveaway, read the rules below and enter away! My thanks to Jon and Tesori for providing this pen for readers of The Pen Addict.

Posted on May 31, 2022 by Brad Dowdy and filed under Tesori, Fountain Pens, Giveaways.

Tesori Venezia Fountain Pen Review

I’m glad fountain pen shows are back, because the best way for me to learn about a new brand is to spend some hands-on time with the product, and talk one-on-one with the maker of said product.

Meeting Jon Tello, of Hello Tello Studios and Tesori Pens, at the 2022 Atlanta Pen Show is a perfect example. Here’s how it goes for me at a typical pen show:

Walk the entire show floor, getting the lay of the land, and deciding which vendors and tables to check in with on round two.
With Tesori, I had heard of the brand but didn’t know much about them or their products. I stop back in later in the day and begin to look at the various pen types and materials.
I strike up a conversation with the maker, in this case Jon Tello. It usually starts with the basics - who, what, when, where, why - and then I’ll ask more product specific questions about things that have caught my eye, such as barrel shapes, or materials.
Leave without buying anything. This is the most important step. I’ll be repeating this process several times over the course of a weekend, and I need to manage my time, and my budget.
Have a think. Seriously. At night, back in my room, I unload my bag, and think about what I want to focus on the next day.
I liked what I saw from Tesori, and what I heard from Jon, so I swing by the table the next day. The idea is to buy a pen if I find something that clicks with me.
Spoiler alert: I buy a pen.

This is an exceedingly normal process for me, your abnormal pen friend.

With a new-to-me pen brand like Tesori, I want to handle as many of the products as I can to see what works for me. This is obviously the biggest benefit of attending an in-person show.

There were several different models to choose from, but I quickly landed on the Venezia model as the one that suited me best. For a full-sized pen, it was one of the smaller overall options on the table. The “smallest big pen” is a typical sweet spot for me.

Outside of the overall size of the pen, the Venezia asks a very specific question with its design: Are you ok without a defined grip section? I generally prefer a shaped grip section, such as a traditional concave, but I use plenty of pens that don’t have that. The Pilot Vanishing point is a good example, minus the whole clip getting in the way thing.

The grip shape of the Venezia is generally straight, and essentially the widest diameter area of the pen at 14.5 mm. When this is the case in any pen design, I want to be sure there is good distance from where I grip the pen to where the nib hits the page. The Venezia handles this in two ways. One, this pen uses a front-threaded design with a short cap, meaning the cap threads are ahead of where you grip the pen. Two, the Bock #6 nib adds to the distance that is required for a comfortable writing pen. Overall, I think of this design as a brush-style grip and feel, which allows for a comfortable, flowing writing style.

Once the binary decision of “Will this pen comfortable for me to use?” is made, then comes the difficult one. How do I choose a barrel color?

This is what caused me the greatest consternation. First world problem, right? But look at all of the colors available in this pen and tell me what you would choose. In Atlanta, they were all available. I’d pick one up, look at it, hold it under the desk lamp, look at it more, rinse and repeat until a decision was made.

Making that decision tougher is the inclusion of a small piece of Venetian glass, or Millefiori, on the top finial, and sometimes, randomly, on the bottom. This is a fun design element that adds to the overall story of the pen. And it’s downright cool looking!

The color I chose was the directly-named Green Orange Blue Pebble, with a matching yellow barrel band, and daisy-like Millefiori on top of the cap. Choosing this pen was far from an easy decision, and I’ll admit that the standout-color barrel band was the deciding factor between this choice, and several other models.

I had this pen fitted with an extra fine Bock #6 steel nib, which was tuned and smoothed by Jon once purchased. Without hunting down the receipt, I believe the total was $230, which lines up closely to the €210 list price on the Tesori website.

If you want even more reasons to love Tesori, they commit 25% of their total sales in support of charities that focus on ending human trafficking and sexual exploitation. In talking with Jon over my few days at the show, I got the feeling that this is a huge part of why he does what he does. One company Tesori supports even provides employment for survivors of trafficking by having them craft the pen pouches that ship with each pen. Amazing stuff.

If you couldn’t tell by now, I am very pleased with this pen, and the mission of the company. The Venezia 2.0 model is wonderfully crafted, and buying one helps to support great causes. I look forward to learning more from Jon, and about Tesori, in the near future.

Membership starts at just $5/month, with a discounted annual option available. To find out more about membership click here and join us!